This one was the biggest iron I had so far. It gave me too much headache in the end, so I kept the rack only.
weeper 11# hinv -mv
Location: /hw/module/001c04/node
IP35 Board: barcode LPM600 part 030-1604-006 rev -A
Location: /hw/module/001c04/node/cpubus/0
IP35PIMM Board: barcode LBD020 part 030-1616-002 rev -G
Location: /hw/module/001c04/node/cpubus/1
IP35PIMM Board: barcode LBD053 part 030-1616-002 rev -G
Location: /hw/module/001c04/Ibrick/xtalk/14
IBRICK Board: barcode LBH248 part 030-1557-007 rev -A
Location: /hw/module/001c04/Ibrick/xtalk/15
IBRICK Board: barcode LBH248 part 030-1557-007 rev -A
Location: /hw/module/001c07/node
IP35 Board: barcode LPM626 part 030-1604-006 rev -A
Location: /hw/module/001c07/node/cpubus/0
IP35PIMM Board: barcode LPC227 part 030-1616-002 rev -G
Location: /hw/module/001c07/node/cpubus/1
IP35PIMM Board: barcode LPC944 part 030-1616-002 rev -G
8 400 MHZ IP35 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
CPU 0 at Module 001c04/Slot 0/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 1 at Module 001c04/Slot 0/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 2 at Module 001c04/Slot 0/Slice C: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 3 at Module 001c04/Slot 0/Slice D: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 4 at Module 001c07/Slot 0/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 5 at Module 001c07/Slot 0/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 6 at Module 001c07/Slot 0/Slice C: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 7 at Module 001c07/Slot 0/Slice D: 400 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
Main memory size: 3072 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 001c04/Slot 0: 1536 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 001c07/Slot 0: 1536 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version Fibre Channel QL2200A, 33 MHz PCI
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 114 on SCSI controller 0 (unit 114)
Disk drive: unit 117 on SCSI controller 0 (unit 117)
Disk drive: unit 124 on SCSI controller 0 (unit 124)
Integral SCSI controller 5: Version IEEE1394 SBP2
IEEE1394 CDROM: node 10100310003d04 port 0 on SCSI controller 5
IOC3/IOC4 serial port: tty3
Gigabit Ethernet: eg0, module 001c04, pci_bus 2, pci_slot 1, firmware version 12.4.10
Integral Fast Ethernet: ef0, version 1, module 001c04, pci 4
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
PCI Adapter ID (vendor 0x104c, device 0x8009) PCI slot 6
IOC3/IOC4 external interrupts: 1
HUB in Module 001c04/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c07/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c04/Slot n0: Revision 6.210
IP35prom in Module 001c07/Slot n0: Revision 6.210
IEEE 1394 High performance serial bus controller 0: Type: OHCI, Version 0 0
USB controller: type OHCI