Cod, my Origin 200. Quite elegant for a server. The most remarkable fact about this server is that the front door is in perfect working order. In fact I got this machine as a rackmount one coming directly from sgi factory refurbishment. I later bought a better dual processor CPU board and the remaining skins. These are used but I tried to make the most of it cosmetically.
cod 1# hinv -mv
Location: /hw/module/1/slot/MotherBoard/node
PIMM_360_4M_2P Board: barcode LEV100 part 030-1497-001 rev H
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
IP29 Board: barcode KZG875 part 030-1389-002 rev B
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
2 360 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
CPU 0 at Module 1/Slot 1/Slice A: 360 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 4 MB Speed 240 Mhz Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 360 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 4 MB Speed 240 Mhz Tap 0x9
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 2048 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Origin 200 base I/O, module 1 slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
cod 2# diskpatch -v
sc0d1l0: Disk SGI IBM DNES-309170YSAF0 Serial: AJFJ4992
sc0d2l0: Disk SGI IBM DPSS-318350MS96A Serial: ZE1G0145
sc0d3l0: Disk SGI IBM DCHS04Y 5353 Serial: 6809B3F3
sc0d4l0: Disk SEAGATE SX1181677LCV C00C Serial: 3EM016MT
cod 3# uname -aR
IRIX64 cod 6.5 6.5.30m 07202013 IP27
cod 12# scsicontrol -i /dev/scsi/sc1d6l0
/dev/scsi/sc1d6l0: CD-ROM TOSHIBA CD-ROM XM-6201TA1037
ANSI vers 2, ISO ver: 0, ECMA ver: 0; supports: reladdr synch linkedcmds
Device is not ready